Ir directamente a la información del producto
1 de 2

IPTCI

IPTCI Bearings BUCNPFB 204 12 Flange Bracket Bearing With BUC 204-12 Black Oxide Bearing Insert and Type-B Seal, 3/4 in Dia Bore, 1-1/2 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 2-1/2 in OAL/Dia

IPTCI Bearings BUCNPFB 204 12 Flange Bracket Bearing With BUC 204-12 Black Oxide Bearing Insert and Type-B Seal, 3/4 in Dia Bore, 1-1/2 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 2-1/2 in OAL/Dia

Precio habitual $48.77 USD
Precio habitual Precio de oferta $48.77 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.

IPTCI Bearings Flange Bracket Bearing, Series: BUCNPFB, 3/4 in Bore Dia, 1-1/2 in L Bolt Center-to-Center, 3-Bolt Flange Mounting, 2-1/2 in Overall Length/Diameter, 4-1/4 in Overall Height, Set Screw Locking Device, Nickel Plated
  • Black Oxide Treated Wide Inner Ring Insert
  • Dual Seals (B-Type)
  • Pre-Lubricated with quality H-1 Food Grade Grease
  • Relubricatable through included Grease Zerk

BUCNPFB series Standard Duty 3-Bolt Flange bearing unit features a Nickel-Plated Cast-Iron Housing and a Black Oxide treated ball bearing insert with flinger seals and set screw lock. The housing is made of cast iron for rigidity and vibration dampening, and has a solid base for mounting stability. Nickel plating provides moderate corrosion resistance. The black-oxide double-sealed, deep-groove ball bearing insert is made of through-hardened chromium steel and is appropriate for applications with moderate radial loads and light thrust or combination loads. It has a wide inner ring on both sides for increased shaft support and reduced inner-ring tilt for smooth operation. ~~ The insert bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. It also has an anti-rotation pin in outer surface that prevents the bearings from spinning within the housing and ensures smooth performance. Steel-reinforced molded rubber lip seals with flingers on both sides of the bearing retain the H1 Food Grade lubricant and deflect contaminants away from the seals. ~~ The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. Set screw locking is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. The unit is equipped with a grease fitting on the housings outer surface for reapplying lubricant, and the insert bearing has a groove and oil hole in the outer ring to efficiently channel grease into the bearing during re-lubrication. ~~ Corrosion resistant Ball Bearing Pillow Block units are suitable for use in industrial and commercial applications that require corrosion resistance due to frequent wash-downs or are operating in a caustic environments such as food processing equipment and machinery, and pharmaceutical producing / processing equipment, among many others.

Inch/Metric Inch
Weight 1.5 lb
Bore Size 0.75 in
Outside Diameter 2 1/2 in
Outside Diameter 64 mm
Length 2 3/8 in
Length 60 mm
Housing No. NPFB 204
Total Length 2 1/2 in
Total Length 64 mm
Total Width 1 5/16 in
Total Width 33.3 mm
Total Height 4 1/4 in
Total Height 108 mm
Bolt Size 5/16
Bolt Hole Spacing 1 1/2 in
Bolt Hole Spacing 38.1 mm
Housing Width 1 in
Housing Width 25 mm
Shaft Height 1 11/16 in
Shaft Height 43.3 mm
Bearing No. BUC 204-12
Inside Ring Width 1.2205 in
Inside Ring Width 31 mm
Base Thickness 5/16 in
Base Thickness 8 mm
Mounting Hole Size 25/64
Mounting Hole Size 25/64 in
Mounting Hole Size 9.9 mm
Seal Type B-Type
Bolt Used 5/16 in
Bearing Inside Ring Width - Extended Side 0.7205 in
Bearing Inside Ring Width - Extended Side 18.3 mm
Bearing Inside Ring Width - Short Side 0.5000 in
Bearing Inside Ring Width - Short Side 12.7 mm
Mounting Base to Bearing Center 5/8 in
Mounting Base to Bearing Center 16 mm
Bolt Hole Spacing [Lateral] 7/8 in
Bolt Hole Spacing [Lateral] 22.2 mm
Finish Nickel Plated
Locking Device Set Screw
Overall Height 4-1/4 in
Series BUCNPFB
Bore Diameter 3/4 in
Bolt Center-to-Center Length 1-1/2 in
Flange Mounting Type 3-Bolt
Overall Length/Diameter 2-1/2 in
Unit Of Measure EA
Alternate PN BUCNPFB 204-12, BUCNPFB20412, BUCNPFB204-12 30D123670-BOX, BUCNPFB 204 12,2101046219
UPC Code 80067574776
UNSPSC 31171501
Weight 1.5 lbs
LxWxH 2.5" x 1.31" x 4.25"
Links Video
Specification Sheet
Full Engineering Drawing
Country Of Origin CN
Package Description EACH
Warranty 1 Year Limited
ADPIM Category Bearings > Flange Mount Bearing Units > Flange Mount Ball Bearing Units
Ver todos los detalles