Ir directamente a la información del producto
1 de 2

IPTCI

IPTCI Bearings BUCNPFB 206 30MM Flange Bracket Bearing With BUC 206 Black Oxide Bearing Insert and Type-B Seal, 30 mm Dia Bore, 1-7/8 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 3-1/4 in OAL/Dia

IPTCI Bearings BUCNPFB 206 30MM Flange Bracket Bearing With BUC 206 Black Oxide Bearing Insert and Type-B Seal, 30 mm Dia Bore, 1-7/8 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 3-1/4 in OAL/Dia

Precio habitual $66.22 USD
Precio habitual Precio de oferta $66.22 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
IPTCI Bearings Flange Bracket Bearing, Series: BUCNPFB, 30 mm Bore Dia, 1-7/8 in L Bolt Center-to-Center, 3-Bolt Flange Mounting, 3-1/4 in Overall Length/Diameter, 5-3/8 in Overall Height, Set Screw Locking Device, Nickel Plated
  • Black Oxide Treated Wide Inner Ring Insert
  • Dual Seals (B-Type)
  • Pre-Lubricated with quality H-1 Food Grade Grease
  • Relubricatable through included Grease Zerk


BUCNPFB series Standard Duty 3-Bolt Flange bearing unit features a Nickel-Plated Cast-Iron Housing and a Black Oxide treated ball bearing insert with flinger seals and set screw lock. The housing is made of cast iron for rigidity and vibration dampening, and has a solid base for mounting stability. Nickel plating provides moderate corrosion resistance. The black-oxide double-sealed, deep-groove ball bearing insert is made of through-hardened chromium steel and is appropriate for applications with moderate radial loads and light thrust or combination loads. It has a wide inner ring on both sides for increased shaft support and reduced inner-ring tilt for smooth operation. ~~ The insert bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. It also has an anti-rotation pin in outer surface that prevents the bearings from spinning within the housing and ensures smooth performance. Steel-reinforced molded rubber lip seals with flingers on both sides of the bearing retain the H1 Food Grade lubricant and deflect contaminants away from the seals. ~~ The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. Set screw locking is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. The unit is equipped with a grease fitting on the housings outer surface for reapplying lubricant, and the insert bearing has a groove and oil hole in the outer ring to efficiently channel grease into the bearing during re-lubrication. ~~ Corrosion resistant Ball Bearing Pillow Block units are suitable for use in industrial and commercial applications that require corrosion resistance due to frequent wash-downs or are operating in a caustic environments such as food processing equipment and machinery, and pharmaceutical producing / processing equipment, among many others.
Inch/Metric Inch
Weight 2 lb
Bore Size 30 mm
Outside Diameter 3 1/4 in
Outside Diameter 83 mm
Length 2 3/4 in
Length 70 mm
Housing No. NPFB 206
Total Length 3 1/4 in
Total Length 83 mm
Total Width 1 37/64 in
Total Width 40.2 mm
Total Height 5 3/8 in
Total Height 137 mm
Bolt Size 5/16
Bolt Hole Spacing 1 7/8 in
Bolt Hole Spacing 47.6 mm
Housing Width 1 1/4 in
Housing Width 32 mm
Shaft Height 2 1/16 in
Shaft Height 52.4 mm
Bearing No. BUC 206
Inside Ring Width 1.50 in
Inside Ring Width 38.1 mm
Base Thickness 3/8 in
Base Thickness 9.5 mm
Mounting Hole Size 25/64
Mounting Hole Size 25/64 in
Mounting Hole Size 9.9 mm
Seal Type B-Type
Bolt Used 5/16 in
Bearing Inside Ring Width - Extended Side 0.8740 in
Bearing Inside Ring Width - Extended Side 22.2 mm
Bearing Inside Ring Width - Short Side 0.6260 in
Bearing Inside Ring Width - Short Side 15.9 mm
Mounting Base to Bearing Center 3/4 in
Mounting Base to Bearing Center 19 mm
Bolt Hole Spacing [Lateral] 1 1/4 in
Bolt Hole Spacing [Lateral] 31.8 mm
Finish Nickel Plated
Locking Device Set Screw
Overall Height 5-3/8 in
Series BUCNPFB
Bore Diameter 30 mm
Bolt Center-to-Center Length 1-7/8 in
Flange Mounting Type 3-Bolt
Overall Length/Diameter 3-1/4 in
Unit Of Measure EA
Alternate PN BUCNPFB 206-30MM, BUCNPFB20630MM, BUCNPFB206-30MM 30F753670-BOX, BUCNPFB 206 30MM,2101041616
UPC Code 80067570175
UNSPSC 31171501
Weight 2 lbs
LxWxH 3.25" x 1.58" x 5.38"
Links Video
Specification Sheet
Full Engineering Drawing
Country Of Origin CN
Package Description EACH
Warranty 1 Year Limited
ADPIM Category Bearings > Flange Mount Bearing Units > Flange Mount Ball Bearing Units

 

Ver todos los detalles