1
/
of
2
IPTCI
IPTCI Bearings BUCNPFB 204 20MM Flange Bracket Bearing With BUC 204 Black Oxide Bearing Insert and Type-B Seal, 20 mm Dia Bore, 1-1/2 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 2-1/2 in OAL/Dia
IPTCI Bearings BUCNPFB 204 20MM Flange Bracket Bearing With BUC 204 Black Oxide Bearing Insert and Type-B Seal, 20 mm Dia Bore, 1-1/2 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 2-1/2 in OAL/Dia
Regular price
$50.52 USD
Regular price
Sale price
$50.52 USD
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
IPTCI Bearings Flange Bracket Bearing, Series: BUCNPFB, 20 mm Bore Dia, 1-1/2 in L Bolt Center-to-Center, 3-Bolt Flange Mounting, 2-1/2 in Overall Length/Diameter, 4-1/4 in Overall Height, Set Screw Locking Device, Nickel Plated
- Black Oxide Treated Wide Inner Ring Insert
- Dual Seals (B-Type)
- Pre-Lubricated with quality H-1 Food Grade Grease
- Relubricatable through included Grease Zerk
BUCNPFB series Standard Duty 3-Bolt Flange bearing unit features a Nickel-Plated Cast-Iron Housing and a Black Oxide treated ball bearing insert with flinger seals and set screw lock. The housing is made of cast iron for rigidity and vibration dampening, and has a solid base for mounting stability. Nickel plating provides moderate corrosion resistance. The black-oxide double-sealed, deep-groove ball bearing insert is made of through-hardened chromium steel and is appropriate for applications with moderate radial loads and light thrust or combination loads. It has a wide inner ring on both sides for increased shaft support and reduced inner-ring tilt for smooth operation. ~~ The insert bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. It also has an anti-rotation pin in outer surface that prevents the bearings from spinning within the housing and ensures smooth performance. Steel-reinforced molded rubber lip seals with flingers on both sides of the bearing retain the H1 Food Grade lubricant and deflect contaminants away from the seals. ~~ The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. Set screw locking is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. The unit is equipped with a grease fitting on the housings outer surface for reapplying lubricant, and the insert bearing has a groove and oil hole in the outer ring to efficiently channel grease into the bearing during re-lubrication. ~~ Corrosion resistant Ball Bearing Pillow Block units are suitable for use in industrial and commercial applications that require corrosion resistance due to frequent wash-downs or are operating in a caustic environments such as food processing equipment and machinery, and pharmaceutical producing / processing equipment, among many others.
| Inch/Metric | Inch |
| Weight | 1.5 lb |
| Bore Size | 20 mm |
| Outside Diameter | 2 1/2 in |
| Outside Diameter | 64 mm |
| Length | 2 3/8 in |
| Length | 60 mm |
| Housing No. | NPFB 204 |
| Total Length | 2 1/2 in |
| Total Length | 64 mm |
| Total Width | 1 5/16 in |
| Total Width | 33.3 mm |
| Total Height | 4 1/4 in |
| Total Height | 108 mm |
| Bolt Size | 5/16 |
| Bolt Hole Spacing | 1 1/2 in |
| Bolt Hole Spacing | 38.1 mm |
| Housing Width | 1 in |
| Housing Width | 25 mm |
| Shaft Height | 1 11/16 in |
| Shaft Height | 43.3 mm |
| Bearing No. | BUC 204 |
| Inside Ring Width | 1.2205 in |
| Inside Ring Width | 31 mm |
| Base Thickness | 5/16 in |
| Base Thickness | 8 mm |
| Mounting Hole Size | 25/64 |
| Mounting Hole Size | 25/64 in |
| Mounting Hole Size | 9.9 mm |
| Seal Type | B-Type |
| Bolt Used | 5/16 in |
| Bearing Inside Ring Width - Extended Side | 0.7205 in |
| Bearing Inside Ring Width - Extended Side | 18.3 mm |
| Bearing Inside Ring Width - Short Side | 0.5000 in |
| Bearing Inside Ring Width - Short Side | 12.7 mm |
| Mounting Base to Bearing Center | 5/8 in |
| Mounting Base to Bearing Center | 16 mm |
| Bolt Hole Spacing [Lateral] | 7/8 in |
| Bolt Hole Spacing [Lateral] | 22.2 mm |
| Finish | Nickel Plated |
| Locking Device | Set Screw |
| Overall Height | 4-1/4 in |
| Series | BUCNPFB |
| Bore Diameter | 20 mm |
| Bolt Center-to-Center Length | 1-1/2 in |
| Flange Mounting Type | 3-Bolt |
| Overall Length/Diameter | 2-1/2 in |
| Unit Of Measure | EA |
| Alternate PN | BUCNPFB 204-20MM, BUCNPFB20420MM, BUCNPFB204-20MM 30D733670-BOX, BUCNPFB 204 20MM,2101041466 |
| UPC Code | 80067570025 |
| UNSPSC | 31171501 |
| Weight | 1.5 lbs |
| LxWxH | 2.5" x 1.31" x 4.25" |
| Links |
Video Specification Sheet Full Engineering Drawing |
| Country Of Origin | CN |
| Package Description | EACH |
| Warranty | 1 Year Limited |
| ADPIM Category | Bearings > Flange Mount Bearing Units > Flange Mount Ball Bearing Units |
Share
